Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2013 >> MKT Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Information System And Entertainment System - 8 Inch Touchscreen) >> Description And Operation >> Information and Entertainment System >> System Operation >> Module Network Input Messages - FCIM

Module Network Input Messages - FCIM

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Broadcast Message Originating Module Message Purpose
Door ajar status BCM Used to determine the door ajar status for the accessory delay feature.
Ignition status BCM Used to indicate the ignition state (OFF, ACCESSORY, RUN, and START) required for FCIM operating modes and fault reporting.
Illumination dimming level IPC Used to control the backlight intensity of the FCIM based on the dimmer switch input.
scientia non olet · About Mike's Workshop Manuals