Cooling Module: Removal

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.

Refer to: HEALTH AND SAFETY PRECAUTIONS .
Refer to: AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
Refer to: AIR CLEANER .
Fig 1: Identifying Pressure Relief Cap
Courtesy of FORD MOTOR CO.
Fig 2: Locating Cooling Fan Motor Wiring Harness Connector And Clip
Courtesy of FORD MOTOR CO.
Fig 3: Locating Tube Retainer
Courtesy of FORD MOTOR CO.
Install new gaskets and O-ring seals.
Torque: 15 Nm

Fig 4: Locating Gaskets Bolts And O-Ring Seals
Courtesy of FORD MOTOR CO.
Refer to: Cooling System Draining and Vacuum Filling .
Fig 5: Removing Charge Air Cooler Hose Clamp
Courtesy of FORD MOTOR CO.
Torque: 5 Nm

Fig 6: Locating Charge Air Cooler Hose Clamp And Bolt
Courtesy of FORD MOTOR CO.
Fig 7: Locating Harness Connector
Courtesy of FORD MOTOR CO.
Fig 8: Locating Cooling Fan Motor Wiring Harness Connectors And Clip
Courtesy of FORD MOTOR CO.
This procedure step requires the specified number of technicians.
Torque: 25 Nm

Fig 9: Locating Bracket Bolts
Courtesy of FORD MOTOR CO.