Fuel Pump Driver Module (FPDM): Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cleaning Protective Backing Of FPDM
Courtesy of FORD MOTOR CO.
Peel off the protective backing from the new FPDM.

Fig 2: Identifying Protective Backing Of FPDM
Courtesy of FORD MOTOR CO.
Locate the FPDM over the 2 studs (for location purposes only) and press down firmly.

Fig 3: Identifying FPDM Studs
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.