Pinpoint Test S : The TELEMATIC Control Unit (TCU) Does Not Respond To The Scan Tool: Notes
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
Refer to AUDIO SYSTEM/NAVIGATION for schematic and connector information.
Normal Operation and Fault Conditions
The TCU communicates with the scan tool through the Infotainment Controller Area Network (I-CAN).
Possible Sources
- Fuse
- Wiring, terminals and connector
- TCU
Visual Inspection and Diagnostic Pre-checks
Verify RJB fuse 1 (5A) is OK.