Catalyst Monitor Sensor: Installation

WARNING: This page is about a different car, the 2013 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Calculate the correct torque wrench setting for the following torque. Refer to Torque Wrench Adapter Formula in illustration .
Special Tool(s) : 303-476 (Socket, Exhaust Gas Oxygen Sensor)

Torque : 48 Nm

Fig 1: Installing Exhaust Gas Oxygen Sensor Using Special Tools
Courtesy of FORD MOTOR CO.

Fig 2: Torque Wrench Adapter Formulas
Courtesy of FORD MOTOR CO.
Fig 3: Locating Engine Lower Cover Bolts
Courtesy of FORD MOTOR CO.
Fig 4: Locating Lower Strip Mounting Bolts
Courtesy of FORD MOTOR CO.
Fig 5: Locating Catalyst Monitor Sensor Connector
Courtesy of FORD MOTOR CO.
1. Torque : 10 Nm
2. Torque : 5 Nm
Fig 6: Locating Turbocharger Hose Clamps And Bolt
Courtesy of FORD MOTOR CO.