Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2012 >> MKZ Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seat System - Seats >> Removal And Installation >> Dual Climate Controlled Seat Module (DCSM) >> Removal

Dual Climate Controlled Seat Module (DCSM): Removal

NOTE: When installing a new Dual Climate Controlled Seat Module (DCSM), it is necessary to carry out the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
  1. Before removing the DCSM, carry out the appropriate steps in the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the front passenger seat. For additional information, refer to Seat - Front  .
  3. Remove the DCSM from the cushion electrical bracket.
    • Release the locking wedges and disconnect the 3 DCSM electrical connectors.
    • Remove the 2 rivets and DCSM.
scientia non olet · About Mike's Workshop Manuals