Removal and Installation
NOTE:
It is not necessary to remove the Audio Front Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode .
- Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
- Remove the Front Controls Interface Module (FCIM). For additional information, refer to Front Controls Interface Module (FCIM) - MKZ .
- Remove the 8 screws and the ACM.
- To install, reverse the removal procedure.
- Download the ACM configuration information from the scan tool. For additional information, refer to PMI in MODULE CONFIGURATION .
NOTE:
Module configuration is required when a new ACM is being installed.