Removal and Installation

NOTE: It is not necessary to remove the Audio Front Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode .

All vehicles

NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
Vehicles with navigation
Remove the Front Display Interface Module (FDIM). For additional information, refer to Front Display Interface Module (FDIM) - Fusion .
Vehicles without navigation
Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
All vehicles

NOTE: For vehicles with navigation, the 2 upper screws were removed with the FDIM.

Remove the 4 screws (2 for navigation) and the ACM.
- Disconnect the electrical connectors.
To install, reverse the removal procedure.
- Download the ACM configuration information from the scan tool. For additional information, refer to PMI in MODULE CONFIGURATION .