Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2012 >> MKZ Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Information System And Entertainment System >> Removal And Installation >> Antenna Module >> Removal and Installation

Removal and Installation

  1. Remove the RH C-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the antenna module connectors.
    • Disconnect the antenna cable-to-antenna module connector.
    • Disconnect the antenna module electrical connectors.
    • Disconnect the antenna module-to-antenna connector.
  3. Remove the bolt and the antenna module.
    • To install, tighten to 12 Nm (106 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals