Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2011 >> MKZ Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Piston Pin Bore Diameter

Piston Pin Bore Diameter

NOTE: Refer to the appropriate article in ENGINE MECHANICAL - 2.5L (EXCEPT HYBRID) , ENGINE MECHANICAL - 2.5L - (HYBRID) , ENGINE MECHANICAL - 3.0L (4V) or ENGINE MECHANICAL - 3.5L for the specification.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
    Fig 1: Identifying Piston Pin Bore Diameter Measuring Directions
    G07780448Courtesy of FORD MOTOR CO.
  1. Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.
scientia non olet · About Mike's Workshop Manuals