Removal and Installation

All 

NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.
1. Upload the audio DSP  module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
2. Remove the subwoofer speaker. For additional information, refer to SPEAKER - SUBWOOFER .
3. Disconnect the audio DSP  module electrical connectors.

   THX sound 

4. Remove the 4 screws and the audio DSP  module.

   Sony sound 

5. Remove the 3 screws the nut and the audio DSP  module.

   All 

6. To install, reverse the removal procedure.
   • Download the configuration information to the audio DSP  module. For additional information, refer to PMI  in MODULE CONFIGURATION .