Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2011 >> MKS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1874 (Anti-Theft System - Passive Anti-Theft System) >> Removal And Installation >> Remote Functions Receiver (RFR) Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION Article.
  2. Disconnect the Remote Functions Receiver (RFR) module electrical connector.
  3. Using a suitable tool (such as a trim removal tool), gently pry the RFR module away from the headliner.
    4. NOTE: The RFR module is secured to the headliner with 3M Duramix® 4747 Super Fast Adhesive at the assembly plant. When installing the RFR module, make sure to use 3M Duramix® 4747 Super Fast Adhesive to secure the RFR module to the headliner in approximately the same position and orientation on the headliner.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals