Trailer Sway Control
Trailer sway control is a unique function in the AdvanceTrac® with a RSC® system that will recognize and aid in reducing trailer sway. The trailer sway control system continually monitors the steering wheel rotation sensor and the yaw rate sensor to identify specific, increasing yaw oscillations that occur during a trailer sway event. If the trailer sway event exceeds certain, programmed parameters, the ABS module and the HCU will modulate brake fluid pressure to specific caliper(s) and the PCM will modulate engine torque until the trailer sway is reduced below the programmed parameters.
When the trailer sway control system activates, the vehicle will produce the same noticeable symptoms as it does when the AdvanceTrac® system activates. In addition, the message center will display TRAILER SWAY, REDUCE SPEED.
The trailer sway control system will only activate when the vehicle speed exceeds 64 km/h (40 mph). The system can be disabled during any key cycle. Refer to the Owner's Manual for information on disabling the system. The system will be re-enabled when the ignition key is turned to the OFF position and back to the RUN position.