Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2010 >> MKT Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Information System And Entertainment System >> Removal And Installation >> Audio Digital Signal Processing (DSP) Module >> Removal and Installation

Removal and Installation

  1. NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.

    Upload the audio DSP  module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .

  2. Remove the RH quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  3. Disconnect the audio Digital Signal Processing (DSP) module electrical connectors.
  4. Remove the 3 screws and the audio DSP  module.
    • To install, tighten to 7 Nm (62 lb-in).
  5. To install, reverse the removal procedure.
    • Download the configuration information from the scan tool. For additional information, refer to PMI  in MODULE CONFIGURATION .
scientia non olet · About Mike's Workshop Manuals