Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2009 >> MKZ AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1006 (Seating) >> Removal And Installation >> Dual Climate Controlled Seat Module (DCSM) >> Installation

Dual Climate Controlled Seat Module (DCSM): Installation

WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the DCSM to the seat.
    • Position the DCSM to the electrical bracket and install 2 new rivets.
    • Connect the 3 DCSM electrical connectors and locking wedges.
  2. Install the front seat and repower the SRS. Do not prove out the SRS at this time.  For additional information, refer to Seat - Front .
  3. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test. For additional information, refer to the General Procedures portion of SUPPLEMENTAL RESTRAINT SYSTEM article.
  4. After installing the DCSM, carry out the appropriate steps in the PMI procedure. For additional information, refer to MODULE CONFIGURATION article.
scientia non olet · About Mike's Workshop Manuals