- The red brake warning indicator and the yellow ABS warning indicator are illuminated
|
|
|
- The red brake warning indicator is always/never on
|
- Brake fluid level switch
- Parking brake switch
- Wiring, terminals or connectors
- Instrument Cluster (IC)
- Smart Junction Box (SJB)
|
|
- Vehicle pulls or drifts during braking
|
- Brake calipers and/or guide pins
- Brake flexible hose
- Brake pads
- Brake discs
|
|
| |
|
|
| |
- Suspension component(s) and/or wheel alignment
|
|
- Brake pedal goes down fast or eases down slowly
|
- Brake fluid leaks and/or air in the system
|
|
| |
|
- CARRY OUT the Brake Master Cylinder - Bypass Condition Component Test.
|
| |
- Hydraulic Control Unit (HCU)
|
|
- Brakes lock up under light brake pedal force
|
|
|
| |
- Brake calipers and/or guide pins
|
|
| |
|
|
- Excessive brake pedal travel (low/spongy pedal)
|
- Brake fluid leaks and/or air in the system
|
|
| |
|
|
| |
|
- CARRY OUT the Brake Master Cylinder - Bypass Condition Component Test.
|
| |
- Brake calipers and/or guide pins
|
|
| |
|
|
| |
|
- INSPECT the brake pedal for correct connection to booster rod. CHECK the brake pedal fasteners for correct torque. REFER to
HYDRAULIC BRAKE ACTUATION
.
|
- Erratic brake pedal travel
|
|
- INSPECT the brake pedal for binding, obstructions and correct connection to booster rod. REPAIR as necessary. CHECK the brake pedal fasteners for correct torque. REFER to Specifications in
HYDRAULIC BRAKE ACTUATION
.
|
| |
|
|
|
|
|
|
| |
- Brake caliper and/or guide pins
|
|
| |
- Brake booster
- Brake master cylinder
|
- CARRY OUT the Brake Master Cylinder - Compensator Port Component Test.
|
- Excessive brake pedal effort
|
- Insufficient engine vacuum for brake booster operation
- Brake booster manifold vacuum hose
- Brake booster
- Brake booster check valve
|
- CARRY OUT the Brake Booster Component Test.
|
| |
|
|