- The shift interlock system does not release/lock correctly
|
- Circuit(s)
- Battery junction box (BJB) fuse F14 (20A)
- Central junction box (CJB) fuses F28 (7.5A) and fuse F30 (15A)
- Brake shift interlock actuator (BSIA)
- Brake pedal position (BPP) switch
- Lighting control module
|
|
- The shift control is out of correct gear relationship
|
- Shift control component(s)
- Internal transmission component(s)
|
|
- The selector lever indicator does not correspond to the gear
|
- Selector lever indicator adjustment
|
|
- The control linkage is binding
|
- Shift control component(s)
- Internal transmission component(s)
|
|
- The selector lever will not shift from range
|
- Shift control component(s)
- Internal transmission component(s)
|
|
- The selector lever indicator does not illuminate
|
|
|
- The transmission control (TC) switch does not operate correctly
|
- TC switch not cycled during self-test
- Fuse F8 (10A)
- TC switch
- Circuit(s)
- Powertrain control module (PCM)
- Instrument cluster
|
|
- The transmission control indicator lamp (TCIL) does not illuminate
|
|
|
- The transmission control indicator lamp (TCIL) is illuminated continuously
|
|
|
- Rattle, noise, buzz or other noise
|
- Selector lever
- Steering column shrouds
|
- INSPECT the selector lever and shrouds for damage and incorrect installation. REPAIR as necessary. REFER to Selector Lever .
|
- Water enters inside the vehicle
|
- Selector lever cable rubber grommet
|
- SECURE the grommet to the bulkhead.
|
| |
- Torn selector lever cable rubber grommet
|
|