Frame and Body Mounting

The frame is bolted to the body and is used to:

• aid in structural support.
• provide mounting surfaces for the rear of the front suspension control arms.
• support the radiator.
• provide a mounting point for the front stabilizer bar.
• provide a mounting point for the number 2 and number 3 crossmembers.

The front number 2 crossmember is bolted to the frame and is used to:

• aid in structural support.
• provide mounting surfaces for the front suspension control arms.
• provide a mounting point for the engine mounts.

The number 3 crossmember is bolted to the frame and is used to:

• aid in structural support.
• provide mounting surfaces for the rear transmission support insulator.

For the removal and installation of the number 3 crossmember, Refer to AUTOMATIC TRANSAXLE/TRANSMISSION .