Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2005 >> Aviator AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Control Components >> Removal And Installation >> Climate Control Assembly >> Removal and Installation

Removal and Installation

  1. Remove the cup holder.
  2. Remove the bezel screw.
  3. Disconnect the bezel switch electrical connectors.
    4. NOTE: The shift control bezel is only partially removed from the floor console to allow removal of the floor console center finish panel.
  4. Position aside the bezel.
    • Depress the tab at the rear of the shift control bezel to release it from the floor console center finish panel and rotate the bezel to gain access to the lower climate control assembly screw.
  5. Remove the instrument panel center cover. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  6. Remove the clock bezel.
  7. Remove the 3 climate control assembly screws.
  8. Disconnect the climate control assembly electrical connectors.
  9. Remove the climate control assembly.
  10. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals