Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2004 >> Town Car Protection Series >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod - Large End Bore

Connecting Rod - Large End Bore

  1. Tighten the bolts to specification, then measure the bore in two directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • Refer to ENGINE for the procedure.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure.
    Fig 1: Measuring Connecting Rod Bore
    G03247797Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals