Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2004 >> Town Car Protection Series >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Speed Control Deactivator Switch >> Installation

Speed Control Deactivator Switch: Installation

  1. Fully apply the brake pedal.
  2. Install the speed control deactivator switch.
    1. Position the speed control deactivator switch in the bracket and rotate clockwise.
    2. Connect the electrical connector.
    Fig 1: Installing Speed Control Deactivator Switch
    G03249462Courtesy of FORD MOTOR CO.
  3. Insert a 1 mm (0.04 in) feeler gauge between the brake pedal actuation surface and the deactivator switch plunger.
  4. Slowly release the brake pedal.
scientia non olet · About Mike's Workshop Manuals