Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2004 >> Aviator AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Transmission Support Insulator - 4x4 >> Notes

Transmission Support Insulator - 4x4: Notes

WARNING: This page is about a different car, the 2003 Lincoln Aviator. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in PARK, position on a hoist.
  2. Support the transmission with a transmission jack.
  3. Remove the components in the order indicated the following illustration.
  4. To install, reverse the removal procedure.
    Fig 1: Removal Sequence Of Transmission Support Insulator - 4x4
    G01635159Courtesy of FORD MOTOR CO.

Item 10: Exhaust Hanger Removal Note 

  1. Position the hanger out of the way.

Item 10: Exhaust Hanger Installation Note 

  1. Install the exhaust hanger prior to installing the screw for the rear support insulator.
scientia non olet · About Mike's Workshop Manuals