Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2004 >> Aviator AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 (Acceleration Control System) >> Removal And Installation >> Accelerator Pedal >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, Refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the accelerator pedal sensor electrical connector.
    Fig 1: Disconnecting Accelerator Pedal Sensor Electrical Connector
    G04002783Courtesy of FORD MOTOR CO.
  3. Remove the two bolts and the accelerator pedal assembly.
    Fig 2: Removing Two Bolts And Accelerator Pedal Assembly
    G04002784Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals