Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2003 >> Town Car Protection Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 566 (HVAC Control System) >> General Procedures >> Refrigerant Oil Adding >> Refrigerant Oil Adding For New Suction Accumulator Or Receiver/Drier Installation

Refrigerant Oil Adding For New Suction Accumulator Or Receiver/Drier Installation

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drill one half-inch hole in the old suction accumulator or receiver/drier cylinder and drain the oil into a clean measuring cup.
  2. Add the quantity of oil drained, plus the amount collected during refrigerant recovery and 60 ml (2 oz.).
scientia non olet · About Mike's Workshop Manuals