Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2003 >> Town Car Protection Series >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Entry Systems >> General Procedures >> Remote Transmitter Programming

Remote Transmitter Programming

  1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming that the program mode has been entered.
    2. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
  2. Press any button on the transmitter to be programmed.
  3. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
  4. To exit program mode, turn the ignition to START or wait 7.5 seconds.
scientia non olet · About Mike's Workshop Manuals