Air Distribution Ducts: Notes
- IF removing the front floor ducts, remove the instrument panel lower insulators.
- IF removing the rear seat floor ducts, remove the front seats. For additional information, Refer to
SEATING
.
- If removing the rear seat floor ducts, remove the lower cowl trim panels and front door sill plates to position the carpet away from the ducts.
- If removing the fresh air inlet duct, remove the cowl panel grille. For additional information Refer to
BODY SYSTEM - EXTERIOR
.
- To remove individual components, only carry out the following steps:
Courtesy of FORD MOTOR CO.
- Illustration 1 of 3. Remove the components in the order indicated in Fig 2.
Courtesy of FORD MOTOR CO.
- Illustration 2 of 3. Remove the components in the order indicated in Fig 3.
Courtesy of FORD MOTOR CO.
- Illustration 3 of 3. Remove the components in the order indicated in Fig 4.
Courtesy of FORD MOTOR CO.
- To install, reverse the removal procedure.