Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2003 >> LS 3.9 A >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine-3.0L) >> Installation >> Engine >> Items 23-29: Subframe and Bolts Installation Note

Items 23-29: Subframe and Bolts Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Position and carefully raise the entire engine, transmission, cooling and subframe assembly into the vehicle.
    Fig 1: Positioning Carefully Raise Entire Engine
    G01285985Courtesy of FORD MOTOR CO.
  2. Install the crossmember bolts.
    Fig 2: Installing Crossmember Bolts
    G01285986Courtesy of FORD MOTOR CO.
  3. Install the RH subframe bolts.
    Fig 3: Installing RH Subframe Bolts
    G01285987Courtesy of FORD MOTOR CO.
  4. Install the LH subframe bolts.
    Fig 4: Installing LH Subframe Bolts
    G01285988Courtesy of FORD MOTOR CO.
  5. Install the transmission support bracket.
    Fig 5: Installing Transmission Support Bracket
    G01285989Courtesy of FORD MOTOR CO.
  6. Remove the powertrain lift and transmission support bracket.
  7. Remove the safety stands from the rear of the vehicle.
scientia non olet · About Mike's Workshop Manuals