Leaf Spring Assembly: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 Ford Pickup, 2001 Ford F550 Super Duty, 2001 Ford F450 Super Duty, 2001 Ford Excursion, and 2001 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Install leaf spring into hanger. Tighten bolt and nut finger tight. Install spring into shackle. Tighten bolt and nut finger tight. Install NEW left "U" bolt thought front spring cap. Install NEW right "U" bolt through axle assembly bracket. Install spring spacer and nuts. Tighten nuts finger tight.
- Lower vehicle onto jack stands until front suspension is supporting weight of vehicle. Tighten "U" joint bolts in a criss-cross sequence. Tighten rear then front leaf spring retaining bolt. Reverse removal procedure. Tighten remaining bolts and nuts. See TORQUE SPECIFICATIONS .