Door Locks: Anti-Theft
- Component Location
- Specifications
- Description And Operation
- Diagnosis And Testing
- Anti-Theft - PATS
- Notes
- Inspection and Verification
- PCM Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Connector Circuit Reference
- Pinpoint Test A: The Anti-Theft Indicator Is Never On - No Three-Second Theft Indicator Proveout
- Pinpoint Test B: The Anti-Theft System Does Not Operate Correctly - Anti-Theft Number Of Programmed Keys Is Below Minimum
- Pinpoint Test C: The Anti-Theft System Does Not Operate Correctly - Antenna Not Connected Or Defective Transceiver
- Pinpoint Test D: The Anti-Theft System Does Not Operate Correctly - Pats Ignition Key Transponder Signal Is Not Received - Damaged Key Or Non-PATS Key
- Pinpoint Test E: The Anti-Theft System Does Not Operate Correctly - PATS Received Incorrect Key-Code From Ignition Key Transponder (Unprogrammed Encoded Ignition Key)
- Pinpoint Test F: The Anti-Theft System Does Not Operate Correctly - PATS Received Invalid Format Of Key-Code From Ignition Key Transponder (Partial Key Read)
- Pinpoint Test G: The Anti-Theft System Does Not Operate Correctly - PATS Transceiver Signal Is Not Received (Not Connected, Damaged, Or Wiring)
- Pinpoint Test H: The Vehicle Does Not Start
- Anti-Theft - Perimeter
- Notes
- Inspection and Verification
- Vehicle Security Module Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Connector Circuit Reference
- Pinpoint Test I: The Alarm System Does Not Disarm - Using the Disarm Switches
- Pinpoint Test J: The Alarm System Does Not Arm/Disarm - Using the Keyless Entry Remote Transmitter
- Pinpoint Test K: THE ALARM SYSTEM DOES NOT ARM/DISARM - USING THE KEYLESS ENTRY KEYPAD
- Pinpoint Test L: The alarm system does not operate correctly
- Anti-Theft - PATS
- General Procedures
- Removal And Installation