Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2002 >> Continental >> Repair and Diagnosis >> External Pages >> Different car >> Section 231 (MULTIFUNCTION Electronic Module System) >> Removal And Installation >> Module - Driver Seat (DSM) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the driver seat. For additional information, refer to SEATING .
  3. Remove the driver seat module (DSM).
    1. Disconnect the electrical connectors.
    2. Remove the screws.
    3. Remove the module.
      Fig 1: Removing Driver Seat Module (DSM)
      G02204038Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals