Digital Transmission Range (TR) Sensor: Installation

WARNING: This page is about a different car, the 2004 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Install the digital TR sensor.
1. Install digital TR sensor.
2. Loosely install the bolts.
Fig 1: Installing Digital TR Sensor
Courtesy of FORD MOTOR CO.

NOTE: Make sure that the manual control lever is in the NEUTRAL position.

Fig 2: Aligning Digital TR Sensor

Courtesy of FORD MOTOR CO.

Using the special tool, align the digital TR sensor.
Tighten the bolts.

Fig 3: Digital TR Sensor Bolts Torque Specification
Courtesy of FORD MOTOR CO.
Reconnect the shift cable at the manual control lever.

Fig 4: Connecting Shift Cable
Courtesy of FORD MOTOR CO.
Reconnect the connector.

Fig 5: Connecting Electrical Connector
Courtesy of FORD MOTOR CO.
Lower the vehicle.