Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 2000 >> Navigator RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Engine System-General Information) >> General Procedures >> Connecting Rod - Piston Pin Side Clearance

Connecting Rod - Piston Pin Side Clearance

WARNING: This page is about a different car, the 2004 Lincoln Navigator and 2004 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
    • Refer to the appropriate article in ENGINES for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate article in ENGINES for the procedure.
    Fig 1: Measuring Clearance Between Connecting Rod And Piston
    G02785603Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals