Reverse Planet Assembly: Disassembly

WARNING: This page is about a different car, the 2003 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Individual parts of the planet assemblies are not repairable.

Remove the No. 11 rear reverse planet thrust washer.

Fig 1: Removing No. 11 Rear Reverse Planet Thrust Washer
Courtesy of FORD MOTOR CO.
Remove the No. 10B front reverse planet thrust washer.
- The pins and shafts in the planet assemblies should be checked for loose fit/damage. Use a new planet assembly if either condition exists.
- Inspect the pinion gears for damaged or excessively worn teeth.
- Check for free rotation of the pinion gears.
- Check for damage in the overdrive planet assembly.
  
  Fig 2: Removing No. 10B Front Reverse Planet Thrust Washer
  Courtesy of FORD MOTOR CO.