Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1992 >> Mark VII LSC >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Run & Bracket Assembly >> Installation

Run & Bracket Assembly: Installation

  1. Install the glass bracket assembly onto the glass run and position them in the door.
  2. Loosely install the upper and lower run retaining hardware.
  3. Insert regulator slide into glass bracket C-channel.
  4. Remove the glass prop and position the glass bracket to the glass. Install the retaining rivets. See DOOR GLASS  .
  5. Adjust glass. See DOOR GLASS  under ADJUSTMENTS.
  6. Cycle the glass to check for proper operation.
  7. Install the door trim panel and watershield. See DOOR TRIM PANEL  .
scientia non olet · About Mike's Workshop Manuals