Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Suspension - Programmed Ride Control) >> Self-Diagnostics >> Test Qt4 >> Continuous Monitor Test

Continuous Monitor Test

WARNING: This page is about a different car, the 1992 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure vehicle passed TEST QT1-QT3. Turn ignition and voltmeter on. While an assistant turns steering wheel from left stop to right stop, tap, wiggle and move PRC components and wiring harness. Observe voltmeter and record any service codes.
  2. If Code 2 is indicated, proceed to TEST QT5. If no codes are indicated, proceed to PINPOINT TEST B1. If any other code(s) are indicated, proceed to PINPOINT TEST Q1.
scientia non olet · About Mike's Workshop Manuals