Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Suspension - Programmed Ride Control) >> Self-Diagnostics >> Pinpoint Test Q4 >> Test Connector Ground

Test Connector Ground

WARNING: This page is about a different car, the 1992 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect PRC test connector. Test connector is located below the windshield wiper motor. Set VOM on 200-ohm scale. Measure resistance between Black wire and ground. If resistance is less than 5 ohms, proceed to PINPOINT TEST Q5. If resistance is 5 ohms or more, repair Black wire between test connector and chassis ground located at right fender apron.

scientia non olet · About Mike's Workshop Manuals