Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1987 >> Mark VII Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Removal & Installation >> Pressure Switch >> Removal

Pressure Switch: Removal

  1. Discharge system pressure by turning ignition off and pumping brake pedal a minimum of 20 times until an increase in pedal force is clearly felt. Disconnect battery ground cable from battery. Disconnect solenoid valve body 7-pin connector.
    CAUTION: Failure to remove connector can result in damage to connector if pressure switch wrench handle slips and strikes connector.
  2. Remove pressure switch using Pressure Switch Socket (T85P-20215-B), a 1/2" to 3/8" adapter, and a 3/8" ratchet.
scientia non olet · About Mike's Workshop Manuals