Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1986 >> Mark VII Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Suspension - Programmed Ride Control) >> Self-Diagnostics >> Test Qt6 >> Continuous Monitor Test (Cont.)

Continuous Monitor Test (Cont.)

WARNING: This page is about a different car, the 1992 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition and voltmeter off to reset PRC processor. Place steering wheel in straight-ahead position. Turn ignition and voltmeter on. Raise and support vehicle.
  2. Using an on-vehicle wheel balancer, spin front wheels at a speed greater than 9 mph (15 km/h). Tap and wiggle PRC components and wiring harness. Record any service codes.
  3. If Code 2 is indicated, proceed to PINPOINT TEST B1. If vehicle passes this test, proceed to PINPOINT TEST A1. If no codes are indicated, proceed to PINPOINT TEST A1. If Code 1 or any code other than those specified is indicated, proceed to PINPOINT TEST Q1.
scientia non olet · About Mike's Workshop Manuals