Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1986 >> Mark VII Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Suspension - Programmed Ride Control) >> Self-Diagnostics >> Test Qt3 >> Key On Engine Off Test (Cont.)

Key On Engine Off Test (Cont.)

WARNING: This page is about a different car, the 1992 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition and voltmeter off to reset PRC processor. Place steering wheel in straight-ahead position. Turn ignition and voltmeter on. Raise and support vehicle. Using an on-vehicle wheel balancer, spin front wheels at a speed greater than 9 MPH (15 km/h). Record any service codes.
  2. If Code 1 is indicated, this portion of testing is passed. Proceed to PINPOINT TEST B1. For intermittent symptoms, proceed to TEST QT4. If Code 2 is indicated, proceed to PINPOINT TEST B1. If vehicle passes B pinpoint tests, proceed to PINPOINT TEST A1.
  3. If no codes are indicated, proceed to PINPOINT TEST A1. If any other code(s) are indicated, proceed to PINPOINT TEST Q1.
scientia non olet · About Mike's Workshop Manuals