Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lincoln >> 1986 >> Mark VII Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Suspension - Programmed Ride Control) >> Self-Diagnostics >> Test Qt2 >> Key On Engine Off Test (Cont.)

Key On Engine Off Test (Cont.)

WARNING: This page is about a different car, the 1992 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition and voltmeter off to reset PRC processor. Place steering wheel in straight-ahead position. Turn ignition and voltmeter on. Place PRC switch in SPORT then in SOFT position. Record any service codes.
  2. If Code 2 is indicated, proceed to TEST QT3. If Code 4 is indicated, proceed to PINPOINT TEST C1. If Code 5 is indicated, proceed to PINPOINT TEST D1. If no codes or any other code than those specified are indicated, proceed to PINPOINT TEST Q1.
scientia non olet · About Mike's Workshop Manuals