Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2024 >> NX 350 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> AIR FUEL RATIO SENSOR (for Sensor 2) >> Removal [11/2021 - 03/2024] >> Procedure

Removal [11/2021 - 03/2024]: Procedure

  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE 

    Refer to REMOVAL [11/2021 - 03/2023] , or refer to REMOVAL [03/2023 - 03/2024]

  2. REMOVE AIR FUEL RATIO SENSOR 
    1. GTY1076523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disengage the 4 wire harness clamps.
      2. Disconnect the air fuel ratio sensor connector.
      3. Using SST, remove the air fuel ratio sensor from the converter with catalyst assembly.
        • SST: 09224-00012 
        NOTE:

        If the air fuel ratio sensor has been struck or dropped, replace it.

scientia non olet · About Mike's Workshop Manuals