Caution / Notice / Hint
NOTE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
- When the forward recognition camera has been replaced with a new one, make sure to clear all stored vehicle control history of each system and the forward recognition camera beam axis alignment data.
HINT:
Forward recognition camera beam axis alignment can be performed by using "One Time Recognition", "Driving Adjustment" or "Camera Axis Adjustment Value Write".
One Time Recognition: Refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) [11/2021 - 03/2024] , or refer to TARGET ADJUSTMENT (ONE TIME RECOGNITION) [03/2024 - ]
Driving Adjustment: Refer to DRIVING ADJUSTMENT [11/2021 - ]
Camera Axis Adjustment Value Write: Refer to CAMERA AXIS ADJUSTMENT VALUE WRITE [11/2021 - ]
- If the forward recognition camera has been replaced with a new one, make sure to perform Software Version Confirmation.
- for Gasoline Model
Before replacing the ECM, refer to Registration.
Refer to REGISTRATION [11/2021 - ]
- for HEV Model
Before replacing the hybrid vehicle control ECU, refer to Registration.
Refer to REGISTRATION [11/2021 - 03/2023] , or refer to REGISTRATION [03/2023 - ]