Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> AIR FUEL RATIO SENSOR (for Sensor 1) >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE HEATER ACCESSORY ASSEMBLY WITH BRACKET 

    Refer to REMOVAL [11/2021 - ]

  2. REMOVE AIR FUEL RATIO SENSOR 
    1. GTY1076834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disengage the 3 wire harness clamps.
      2. Disconnect the air fuel ratio sensor connector.
      3. Using SST, remove the air fuel ratio sensor from the exhaust manifold.
        • SST: 09224-00012 
        NOTE:

        If the air fuel ratio sensor has been struck or dropped, replace it.

scientia non olet · About Mike's Workshop Manuals