Inspection [09/2014 - ]: Procedure
- INSPECT STEERING HEATER SWITCH (REFRESHING SEAT SWITCH)
- Remove the steering heater switch (refreshing seat switch).
*a Component without harness connected (Steering Heater Switch (Refreshing Seat Switch)) Refer to REMOVAL [09/2014 - ]
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 (IG) - 5 (IN) Steering heater switch (refreshing seat switch) is pushed Below 200 Ω 1 (IG) - 5 (IN) Steering heater switch (refreshing seat switch) is not pushed 10 kΩ or higher
- Remove the steering heater switch (refreshing seat switch).