Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2021 >> RC F Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt - Service Information >> Front Seat Inner Belt Assembly >> Inspection [09/2014 - ] >> Procedure

Inspection [09/2014 - ]: Procedure

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY462711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Front Seat Inner Belt Assembly LH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Driver seat belt unfastened 10 kΩ or higher
      1 - 2 Driver seat belt fastened Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly LH.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY506756Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Front Seat Inner Belt Assembly RH)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Front passenger seat belt unfastened 10 kΩ or higher
      1 - 2 Front passenger seat belt fastened Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly RH.

scientia non olet · About Mike's Workshop Manuals