Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2021 >> NX 300 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Inspection [10/2014 - ] >> Procedure

Inspection [10/2014 - ]: Procedure

  1. INSPECT ENGINE OIL LEVEL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - Body ground On Below 1 Ω
      1 - Body ground Off 10 kΩ or higher

      If the result is not as specified, replace the engine oil level sensor.

      GTY514346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Engine Oil Level Sensor)
      *b Body ground
scientia non olet · About Mike's Workshop Manuals