Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2021 >> LX 570 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Removal [09/2015 - ] >> Procedure

Removal [09/2015 - ]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Refer to PRECAUTION [09/2015 - ] ).

  2. REMOVE UPPER RADIATOR SUPPORT SEAL 

    Refer to PROCEDURE - Step 3

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - 08/2019] , or refer to INITIALIZATION [08/2019 - ] ).

  4. REMOVE STEERING PAD 

    (Refer to REMOVAL [09/2015 - 08/2016] , or refer to REMOVAL [08/2016 - ] )

  5. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Remove the 2 screws and cruise control main switch.
      GTY655367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector.