Installation [12/2017 - ]: Procedure

1. for Bank 2:
   1. Using a T30 "TORX" socket wrench, install the air by-pass valve assembly with the 3 bolts.

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

   2. Connect the connector and wire harness.
   3. Install the 2 bolts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

2. for Bank 1:
   1. Using a T30 "TORX" socket wrench, install the air by-pass valve assembly with the 3 bolts.

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

   2. Connect the connector to the air by-pass valve assembly.

Refer to PROCEDURE - Step 128 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 128 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 128 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 128 [10/2023 - ]

Refer to PROCEDURE - Step 127 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 127 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 127 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 127 [10/2023 - ]

Refer to PROCEDURE - Step 132 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 132 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 132 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 132 [10/2023 - ]

Refer to PROCEDURE - Step 131 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 131 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 131 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 131 [10/2023 - ]