Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2021 >> LC 500h >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - Service Information >> Fuel Pressure Sensor >> Installation [01/2017 - 05/2023] >> Procedure

Installation [01/2017 - 05/2023]: Procedure

  1. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR) 

    HINT: 

    Perform "Inspection After Repair" after replacing the fuel delivery pipe sub-assembly (fuel pressure sensor).

    Refer to INITIALIZATION [01/2017 - 09/2018] , or refer to INITIALIZATION [09/2018 - 04/2020] , or refer to INITIALIZATION [04/2020 - ]

    Refer to INSTALLATION [01/2017 - 05/2023] 

    NOTE:
    • Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly.
    • If the fuel pressure sensor is removed, replace the fuel delivery pipe sub-assembly (fuel pressure sensor) with a new one.
  2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [01/2017 - 04/2020] , or refer to INITIALIZATION [04/2020 - 05/2023]

  3. INSTALL NO. 2 DECK BOARD 

    Refer to PROCEDURE - Step 13 [01/2017 - 01/2021] , or refer to PROCEDURE - Step 13 [01/2021 - 05/2023]

  4. INSPECT FOR FUEL LEAK 

    Refer to PROCEDURE - Step 1

scientia non olet · About Mike's Workshop Manuals