How To Proceed With Troubleshooting [01/2017 - ]: Procedure

Result

Result: 

NEXT 

See step  2

1. Measure the auxiliary battery voltage with the power switch off.

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Use the Techstream to check if the power integration system is functioning normally.

   Refer to DTC CHECK / CLEAR [01/2017 - ]

   Result

   Result	Proceed to
   Power integration system DTCs are not output	A
   Power integration system DTCs are output	B

Result: 

B 

GO TO POWER INTEGRATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [01/2017 - ] 

Result: 

A 

See step  4

1. Using the Techstream, check the CXPI communication function to ensure that there are no malfunctions in the communication system.

   Refer to DTC CHECK / CLEAR [01/2017 - ] 

   Result

   Proceed to
   No DTCs output
   DTCs output

Result: 

DTCs output 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [01/2017 - 05/2023]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [05/2023 - ]  

Result: 

No DTCs output 

See step  5

1. Data List / Active Test

   Refer to DATA LIST / ACTIVE TEST [01/2017 - ] 

2. Terminals of ECU

   Refer to TERMINALS OF ECU [01/2017 - 05/2023] , or refer to TERMINALS OF ECU [05/2023 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

END